Loading...
HomeMy WebLinkAboutContract No. 2014-2607rusenbauer Firefighting Technology To: City of Columbia Heights 590 401h Ave NE Columbia Heights, MN 55421 RE: HGAC Contract #FS12 -13 Date: 11 -11 -14 Contract No. 2014 -2607 We hereby propose and agree to furnish, after your acceptance of this proposal and the proper execution by the City of Columbia Heights MN, hereinafter called the BUYER and an officer of Rosenbauer Minnesota LLC, Wyoming, MN a division subsidiary of Rosenbauer America, hereinafter called the COMPANY, the following apparatus and equipment: Rosenbauer Heavy Duty EXT Pumper Body w /Equipment $392,120.00 International 7400 4 Door Chassis $ 96,800.00 TOTAL ... $488,920.00 Four Hundred Eighty Eight Thousand Nine Hundred Twenty Dollars and 00 /100. All of which are to be built in accordance with the specifications and drawing attached which are made a part of this agreement and contract. Total contract price includes required HGAC inter -local agreement fee and apparatus familiarization class. No other taxes or fees apply. "CHASSIS IS TO BE PROGESS PAID FOR IN THE AMOUNT SHOWN ABOVE UPONS ITS COMPLETION AND ARRIVAL AT THE APPARATUS MANUFACTURERS FACILITY OR ADDITIONAL INTEREST CHARGES WILL APPLY. Delivery: The estimated delivery time for the completed apparatus, is to be made within 330 -360 calendar days after receipt of and approval of this contract duly executed, (Chassis must arrive within 180 days or delivery may be delayed) subject to all causes beyond the Company's control. The quoted delivery time is based upon our receipt of the specified materials required to produce the apparatus in a timely manner. The Company can not be held responsible for delays due to Acts of God, Labor Strikes, or Changes in Governmental Regulations that result in delayed delivery to our manufacturing facilities of these specified materials. This delivery estimate is based on the Company receiving complete and accurate paperwork from the Buyer and that no major changes take place during pre - construction, mid point inspections or final inspections. Changes required or requested by the Buyer during the construction process may be cause for an increase in the number of days required to build said apparatus. Payment Terms: Final payment for the apparatus shall be made at time of final inspection and pick up / delivery of the completed vehicle. It is the responsibility of the Buyer to have full payment ready when the apparatus is complete and ready to pick up. If payment is delayed or delivery is delayed pending payment, a daily finance and storage fee may apply. Upon pick up of the apparatus by the Buyer, Buyer agrees to provide all liability and physical damage insurance. It is further agreed that if on delivery and test, any defects should develop, the Company shall be given reasonable time to correct same. Guarantee of the chassis is subject to the guarantee of the chassis manufacturer. The amount in this proposal shall remain firm for a period of 30 days from the date of same. Respectfully submitted, BUYER BIDDER GENERAL SAFETY FIRE APPARATUS INC. We accept the above Pro osai,arru' Dealer Dealership Principal enter into c ct yvfk t e belo+ Title 1 C Date ♦� It After company receipt of this document signed by the Buyer, the document will be reviewed and upon approval, countersigned by the Company putting the document in force. ROSENBAGER MIP ESO A LLC. Title Date COLUMBIA HEIGHTS - CITY COUNCIL LETTER AGENDA SECTION: Items for ORIGINATING DEPARTMENT: Meeting date: Consideration Fire August 25, 2014 No. ITEM: Approve Contract with Houston - Galveston Area BY: Gary Gorman Council No: Resolution 2014 -61 DATE: August 25, 2014 Background: Fire Dept. staff has started the process to replace Engine 4, originally purchased in 1984. In the past, staff would have to write specific specs for a new engine and then go through a sealed bidding process. This process takes time and firefighters do not have the needed expertise to write complex specs. Many communities around the Country, and in Minnesota, have used the Houston - Galveston Area Council (H -GAC) purchasing consortium. This consortium has pre bid out the costs of building fire apparatus with most of the fire equipment vendors around the country. This savings is passed on to the purchaser. The City can pick a fire apparatus vendor off of the list and deal directly with that vendor to design the vehicle. The vendor will put together the specs with all of the costs known up front. When the specs are completed we immediately know the cost of the vehicle. To start the process the City must "join" the H -GAC through the contract that is before the Council for approval. There is no direct cost to H -GAC for signing the contract and joining. The City Attorney has reviewed the contract. A copy of the contract along with information about the H -GAC is included. A list of Minnesota communities that have contracted with, and purchased through the H- GAC is also included. RECOMMENDED MOTION: Move to waive the reading of Resolution No. 2014 -61 there being ample copies available to the public. RECOMMENDED MOTION: Move to adopt Resolution No. 2014 -61 authorizing the City Manager to enter into a cooperative purchasing program contract with the Houston - Galveston Area Council. COUNCIL ACTION: f C INTERLOCAL CONTRACT 1Lc 4 f sr�es rurcM�siwe satur� FOR COOPERATIVE PURCHASING No.: Permanent Number assigned by H -GAC THIS INTERLOCAL CONTRACT ( "Contract'), made and entered into pursuant to the Texas Interlocal Cooperation Act, Chapter 791, Texas Government Code (the "Act "), by and between the Houston - Galveston Area Council, hereinafter referred to as "H- GAC," having its principal place of business at 3555 Timmons Lane, Suite 120, Houston, Texas 77027, and * City of Columbia Heights ' a local government, a state agency, or a non - profit corporation created and operated to provide one or more governmental functions and services, hereinafter referred to as "End User," having its principal place of business at * 590 40th Ave NE. Qglu,mbia Heights, MN 55421 WITNESSETH WHEREAS, H -GAC is a regional planning commission and political subdivision of the State of Texas operating under Chapter 391, Texas Local Government Code; and WHEREAS, pursuant to the Act, H -GAC is authorized to contract with eligible entities to perform governmental functions and services, including the purchase of goods and services; and WHEREAS, in reliance on such authority, H -GAC has instituted a cooperative purchasing program under which it contracts with eligible entities under the Act; and WHEREAS, End User has represented that it is an eligible entity under the Act, that its governing body has authorized this Contract on * 08/25/2014 (Date), and that it desires to contract with H -GAC on the terms set forth below; NOW, THEREFORE, H -GAC and the End User do hereby agree as follows: ARTICLE 1: LEGAL AUTHORITY The End User represents and warrants to H -GAC that (1) it is eligible to contract with H -GAC under the Act because it is one of the following: a local government, as defined in the Act (a county, a municipality, a special district, or other political subdivision of the State of Texas or any other state), or a combination of two or more of those entities, a state agency (an agency of the State of Texas as defined in Section 771.002 of the Texas Government Code, or a similar agency of another state), or a non - profit corporation created and operated to provide one or more governmental functions and services, and (2) it possesses adequate legal authority to enter into this Contract. ARTICLE 2: APPLICABLE LAWS H -GAC and the End User agree to conduct all activities under this Contract in accordance with all applicable rules, regulations, and ordinances and laws in effect or promulgated during the term of this Contract. ARTICLE 3: WHOLE AGREEMENT This Contract and any attachments, as provided herein, constitute the complete contract between the parties hereto, and supersede any and all oral and written agreements between the parties relating to matters herein. ARTICLE 4: PERFORMANCE PERIOD The period of this Contract shall be for the balance of the fiscal year of the End User, which began * 01 /01 /2014 and ends* 12/31/2014 . This Contract shall thereafter automatically be renewed annually for each succeeding fiscal year, provided that such renewal shall not have the effect of extending the period in which the End User may make any payment due an H- GAC contractor beyond the fiscal year in which such obligation was incurred under this Contract. ARTICLE 5: SCOPE OF SERVICES The End User appoints H -GAC its true and lawful purchasing agent for the purchase of certain products and services through the H- GAC Cooperative Purchasing Program. End User will access the Program through HGACBuv.com and by submission of any duly executed purchase order, in the form prescribed by H -GAC to a contractor having a valid contract with H -GAC. All purchases hereunder shall be in accordance with specifications and contract terms and pricing established by H -GAC. Ownership (title) to products purchased through H -GAC shall transfer directly from the contractor to the End User. . . (over) ARTICLE 6: PAYMENTS H -GAC will confirm each order and issue notice to contractor to proceed. Upon delivery of goods or services purchased, and presentation of a properly documented invoice, the End User shall promptly, and in any case within thirty (30) days, pay H -GAC's contractor the full amount of the invoice. All payments for goods or services will be made from current revenues available to the paying party. In no event shall H -GAC have any financial liability to the End User for any goods or services End User procures from an H- GAC contractor. ARTICLE 7: CHANGES AND AMENDMENTS This Contract may be amended only by a written amendment executed by both parties, except that any alterations, additions, or deletions to the terms of this Contract which are required by changes in Federal and State law or regulations are automatically incorporated into this Contract without written amendment hereto and shall become effective on the date designated by such law or regulation. H -GAC reserves the right to make changes in the scope of products and services offered through the H -GAC Cooperative Purchasing Program to be performed hereunder. ARTICLES: TERMINATION PROCEDURES H -GAC or the End User may cancel this Contract at any time upon thirty (30) days written notice by certified mail to the other party to this Contract. The obligations of the End User, including its obligation to pay H -GAO's contractor for all costs incurred under this Contract prior to such notice shall survive such cancellation, as well as any other obligation incurred under this Contract, until performed or discharged by the End User. ARTICLE 9: SEVERABILITY All parties agree that should any provision of this Contract be determined to be invalid or unenforceable, such determination shall not affect any other term of this Contract, which shall continue in full force and effect. ARTICLE 10: FORCE MAJEURE To the extent that either party to this Contract shall be wholly or partially prevented from the performance within the term specified of any obligation or duty placed on such party by reason of or through strikes, stoppage of labor, riot, fire, flood, acts of war, insurrection, accident, order of any court, act of God, or specific cause reasonably beyond the party's control and not attributable to its neglect or nonfeasance, in such event, the time for the performance of such obligation or duty shall be suspended until such disability to perform is removed; provided, however, force majeure shall not excuse an obligation solely to pay funds. Determination of force majeure shall rest solely with H -GAC. ARTICLE 11: VENUE Disputes between procuring party and Vendor are to be resolved in accord with the law and venue rules of the State of purchase. THIS INSTRUMENT HAS BEEN EXECUTED IN TWO ORIGINALS BY THE PARTIES HERETO AS FOLLOWS: -City of Columbia Heights Name of End User (local government. agency, or non-profit corporation) .590 40th Ave NE Mailing Address * Columbia Heights MN 55421 City State ZIP Code /0-1 *By: Signature of chie elected or appol,died official -Walt Fehst, City Manager Typed Name & Title of Signatory Date Houston - Galveston Area Council 3555 Timmo33s-bape, Suite Houston, TX 77027 Executive Director �Manager Date: *Denotes required fields rev. 03/11 CITY COUNCIL LETTER Meeting of November 24, 2014 AGENDA SECTION: Items for ORIGINATING DEPARTMENT: CITY Consideration Fire MANAGER No. APPROVAL ITEM: Request authorization to purchase Fire Department BY: Gary Gorman BY: pumper No: DATE: November 24, 2014 DATE: Background: Existing Engine 4 is a 1984 Ford L900 pumper purchased in 1984 from General Safety (now Rosenbauer MN) for $122,049. The fire service life expectancy of pumpers is generally twenty years. Instead of replacement in 2004, the pumper was refurbished at a cost of $54,303. Due to the refurbishment and the excellent care by Public Works maintenance staff and firefighters, the Fire Department was able to extend the life an additional ten years. Engine 4 has 27,901 miles on it. The miles are low but due to the fact that pumpers spend most of their time idling and pumping the 3368 engine hours is a better reflection of its use. The Council approved a contract with the Houston - Galveston Area Council to be a member in their purchasing consortium. In the past, staff would have to write specific specs for a new engine and then go through a sealed bidding process. This process takes time and firefighters do not have the needed expertise to write complex specs. Many communities around the Country, and in Minnesota, have used the Houston - Galveston Area Council (H -GAC) purchasing consortium. This consortium has pre bid out the costs of building fire apparatus with most of the fire equipment vendors around the country. This savings is passed on to the purchaser. The City can pick a fire apparatus vendor off of the list and deal directly with that vendor to design the vehicle. The vendor will put together the specs with all of the costs known up front. In the end the specs and contract are submitted by the manufacturer to the Houston - Galveston Area Council for review and approval based on their purchasing program and our Contract #FS 12 -13. Rosenbauer MN, located in Wyoming, MN, was chosen as our manufacturer. Their close proximity allows faster service without having our truck out of service for long periods of time. The Fire Department has an excellent history with Rosenbauer as they were the manufacturer of our current pumpers and aerial. A committee of firefighters was formed to research and recommend a replacement pumper. The research included trips to Rosenbauer to look at many different commercial chassis brands and styles. The International brand chassis was picked for many reasons. The International is one of the top brands being used for fire apparatus and has an excellent history as a general truck chassis and as a fire pumper. For the firefighters dressed in all their gear and air packs the International has more cab space for firefighters to move around and the doors open a full 90 degrees for safer exiting. Commercial chassis' are also approximately $90,000 to $100,000 less than the custom cabs that were looked at and provided no additional benefit. The layout of the body of the pumper was well thought out for firefighter safety as the first priority, with the pump panel and all hose connections in the rear of the truck. A larger water tank will give firefighters more water to use while waiting for their water supply. The final cost is $488,920.00. This final cost is broken down as: International chassis $96,800.00 Pumper body $323,620.00 Equipment $61,000.00 Equipment mounting $7500.00 The Capital replacement was approved as part of the 2014 budget process. RECOMMENDED MOTION: Move to authorize the purchase of one new International 7400 4- door truck chassis in the amount of $96,800.00 and one Rosenbauer Heavy Duty EXT Pumper body with equipment and equipment mounting in the amount of $392,120.00 from Rosenbauer Minnesota LLC of Wyoming, Minnesota and that the Mayor and City Manager are authorized to enter into a contract for same. COUNCIL ACTION: �rosenbauer FlreflghLing Techno /ogy Columbia Heights HGAC Engine Exp. Date: 12/05/2014 Quote No: 10083 -0033 1 == EXT Pmpr/Tnkr Bid Prep Forms - 2013.008 04104/14 =_ 00 -00 -1300 1 Fire Department Name 00 -00 -1499 1 Overall Height Restriction, NONE 00 -00 -1509 1 Overall Length Restriction, NONE 00 -00 -1519 1 Overall Width Restriction, NONE 00 -00 -1529 1 Wheelbase Restriction, NONE 00 -00 -1539 1 Angle of Approach, NFPA Minimum, 8 Degrees 00 -00 -1549 1 Angle of Departure, NFPA Minimum, 8 Degrees 00 -12 -1100 1 Financial Stability Response 01 -06 -0510 1 Calculated Center of Gravity 1 == EXT Pmpr/Tnkr Warranties -BR - 2013.008 04/04/14 =_ 01 -16 -0150 1 -- Warranty, Apparatus, Bumper to Bumper, 1 Year, BR 01 -19 -0460 1 -- Warranty, Bdy, Alum, Life -Time, Transferable, BR 01 -19 -2450 1 -- Warranty, Subframe, Lifetime Alum, Transferable, BR 01 -20 -0360 1 -- Warranty, Paint, PPG, 10 Years, EXT, BR 01 -21 -0150 1 -- Warranty, Lettering and Striping, 1 Year, BR 01 -17 -0750 1 -- Pump Warranty, Waterous, 5 Years, BR 02 -14 -6250 1 Plmbg Warranty, Stnls Stl, 10 Years, BR 01 -33 -3300 1 Mnls, Bdy Complete, Compact Disc Version 01 -33 -5400 1 Mnls, Elec, As Built Bdy, CD Compact Disc, BR 11 _= EXT Pmpr/Tnkr - DC Electrical System - 2013.008 04/04/14 =_ 50 -06 -1000 1 Eiecal, Base, Standard, Requires Load Mgmt 50 -10 -1400 1 -- Load Manager, Class 1, TSM, Auto Fast Idle 55-11 -1300 1 Dr Open /Hazard Wrn Lt, Flashing LED Red Lens 50 -12 -2300 S < 1 1 Swtch Console, Btwn Front Seats, Cmmrcl, EXT A drop in style binder slot shall be provided at the rear of the center console large enough to accommodate a 3" 3 ring binder. 50 -15 -3100 1 Battery Swtch, Mstr Disconnect, Chs Sppld 50 -15 -7800 1 Battery Chrgr /Comp, KUSS, Pump Plus 1200 091 - 187- 12 -R -B1 50 -16 -1100 1 1-- Display, Universal, Bar Graph, Sngl Battery Bank 50 -20 -1210 1 Shore Power Inlet, 120V, Mni 50 -20 -1124 S < 1 1-- Shore Power Inlet, Inside Left Front Cab Door, Commerical The shore power plug shall be located in the driver side seat riser inside the cab similar to Minneapolis engines. 50 -42 -2000 1 1 Air Horns, (2) Hood Mntd 50 -43 -2000 1 -- Air Horn Cntrl, Driver, Horn Ring, Air /Elec 50-43 -2300 1 -- Air Horn Cntrl, Officer, Sgle Dash Swtch 51 -00 -1200 1 ( -- 12V Power /Ground, 20A, Front Cab 51 -00 -1800 S < 1 1 -- 12V Dual USB Port .Chassis Cab Dash One (1) dual 12 volt USB port shall be provided on the chassis cab dash. 51 -00 -4000 1 -- Switched Power 51 -00 -2100 2 -- 12V Power Outlet, 15A, Center Dash 51 -00 -4010 2 -- Constant Power 1 DOME - CABINET - INTERIOR- ENGINE -PUMP LtS 51 -05 -3000 S < 1 AUXILIARY CAB CEILING DOME LIGHTS A total of four (4) combination red /clear individually switched dome lights shall be installed on the cab inteior ceiling. Two in the front crew area and two in the rear crew area. 51 -05 -6200 1 Lt, Engine Cmpt, 12 Volt LED 51 -05 -9000 1 J-- Switch on Light Head 51 -05 -6400 1 Lt, Pump Cmpt, 12 Volt LED With Swtch 51 -05 -9000 1 -- Switch on Light Head 52 -01 -1210 1 Back Up Alarm, EXT 52 -05 -1100 2 i -- Defogger Fan, Front Cab 52 -07 -1200 1 Headl-t Flasher, Wig Wag 52 -08 -1009 S < 1 i— Mount Customer Supplied 110V Items Mount customer supplied Thermal Imaging Camera, HCN monitors and 4 -Gas monitor on the rear vertical wall of the center cab console. Mount customer supplied radio charging back on top of center console towards the rear, Where possible the items will utilize the specified 4 place power outlet strips to plug into versus hard wire. 52 -15 -1200 1 Radio Antenna Base, Supply and Install, Ea 52 -15 -1700 1 Radio, Fire, Install Cstmer Supl'd 51 -00 -1700 1 -- 12V Power /Ground, 30A, Radio Lctn 51 -00 -4000 1 -- Switched Power 52 -15 -1500 1 -- Radio Spkr, Fire, Install Cstmer Supl'd, Ea 52 -30 -1200 1 MDT Tray, Supply and Install 52 -41 -1400 1 Seat Belt Waming/VDR System, Weldon /Akron 53 -01 -1200 1 Marker Lts, LED, DOT Requirements 53 -02 -1250 1 License Plate Brkt, Cast Prdts, LP0005 -1 w/ LED Lt 53 -03 -0065 1 Whelen Rr DOT LED Ltng Pkg M6 53 -03 -2750 1 ( -- Tail /Brake Lts, Whelen, LED, M6 53 -04 -2750 1 -- Turn Signals, Whelen, LED, M6 53 -06 -3550 1 -- Backup Lts, Whelen, LED, M6 53 -07 -1210 1 -- Tail Lt Bezel, 4 Lts, Whln M6 53 -05 -1800 1 Turn Signals, Mid Bdy, LED Marker Lt 5401 -0550 1 =_= LED Ground Lts - PmprlTnkr - MN 54 -02 -1520 1 -- Ground Lts, Cab, 4-Dr, LED, Pr Whelen 3SCOCDCR 54 -03 -1420 1 -- Ground Lts, Mid Body, LED, Pr Whelen 3SCOCDCR 54 -03 -1620 1 -- Ground Lts, Rr Step, LED, Pr Whelen 3SCOCDCR 54 -04 -1999 1 -- Lt Swtch , Ground Lts w/ Park Brake 54 -10 -1300 2 Step Lt, Fxd /Fldg Step, LED, Ea 54 -10 -1450 2 Step Lt, Rr Tailboard, LED, Ea 54 -11 -2100 1 Lt Swtch , Step/WIkwy Lts Wired Park Brake Swtch 54-15 -5500 2 -- Scene Lt Lctn, Left Side Of Bdy 54 -15 -5600 2 -- Scene Lt Lctn, Right Side Of Bdy 54 -15 -6400 1 j -- Scene Lt Swtch , Left Scene Lts, Cab 54 -15 -6500 1 -- Scene Lt Swtch , Right Scene Lts, Cab 54 -15 -1375 2 -- Scene Lt, Whln, Pioneer Plus S -LED, PFP2R,Dual Pnl, Rcsd, Wht 54 -15 -5700 2 -- Scene Lt Lctn, Rr Of Bdy 54 -15 -6600 1 (— Scene Lt Swtch , Rr Scene Lts, Cab 54 -15 -6700 1 -- Scene Lt Swtch , Rr Scene Lts, Auto w/ Reverse 56 -01 -1360 1 Siren, Elect, FS PA -300 w /Priority #690002 56 -02 -1410 1 -- Spkr, F -S BP200 -EF, 200 Watt 56 -03 -1800 1 1 -- Spkr Lctn, To Be Determined by Body Mfg 56 -06 -0200 < 1 Siren, F -S, Q213, Install Fire Department Supl'd Install recessed in driver side of bumper extension 56 -07 -1300 1 j -- Siren Cntrl, F -S, 02B, Driver's Side Foot Swtch 56 -07 -1500 1 -- Siren Cntrl, F -S, Q213, Dash Button, Officer's Side 56 -07 -1200 1 -- Siren Brake, F -S, Q213, Officer's Side 57 -02 -1110 S < 1 -- Lt Bar, Whelen, Ultra Freedom, #FN60VLED, LED, 160" Lightbar colored passenger side to driver side respectively. Blue on side facing end / Blue / Blue / Take Down / Emitter / Take Down / Red / Red / Red on side facing end Front take down to be on separate switch in cab. 57 -03 -7100 S < 1 1- Traffic Emitter, 3M Opticom, Instld in Lt Bar Costing in lightbar 57 -10 -0600 1 -- Lightbar Cntrl, with Master Warning Switch I REAR FACING UPPER WARN LTS - UPPER ZONE C 58 -71 -1770 1 -- Wrn Lts, Whelen, Upper Rr (2) M9 LED 57 -20 -1400 1 -- Wrn Lt, Drvr, Whelen, M9, Red LED, Color Lens, Ea 57 -20 -1401 1 -- Wrn Lt, Offcr, Whelen, M9, Red LED, Color Lens, Ea 58 -01 -2180 2 -- Flange, Chrome, Wrn Lt, Whln, M9 Ea 58 -61 -2100 1 -- Wrn Lts, Whelen, Upper Side Rr (2) M9 LED 57 -20 -1400 1 -- Wrn Lt, Drvr, Whelen, M9, Red LED, Color Lens, Ea 57 -20 -1401 1 ( -- Wrn Lt, Offcr, Whelen, M9, Red LED, Color Lens, Ea 58 -01 -2180 2 -- Flange, Chrome, Wrn Lt, Whln, M9 Ea 1 CAB WARNING LTS 58 -03 -2000 57 -20 -1200 57 -20 -1203 58 -01 -2140 58 -09 -2000 57 -20 -1200 57 -20 -1201 58 -01 -2140 58 -26 -2000 57 -20 -1200 57 -20 -1201 58 -01 -2140 58 -36 -2000 57 -20 -1200 57 -20 -1201 58 -01 -1200 �— Wrn Lts, Whelen, Low Frnt, (2) M6 LED -- Wrn Lt, Drvr, Whelen, M6, Red LED, Color Lens, Ea -- Wrn Lt, Offer, Whelen, M6, Blue LED, Color Lens, Ea -- Flange, Chrome, Wrn Lt, Whin, M6, Ea -- Wrn Lts, Whelen, Intrsct (2) M6 LED -- Wrn Lt, Drvr, Whelen, M6, Red LED, Color Lens, Ea -- Wrn Lt, Offcr, Whelen, M6, Red LED, Color Lens, Ea -- Flange, Chrome, Wrn Lt, Whln, M6, Ea -- Wrn Lts, Whelen, Low Mid Bdy (2) M6 LED �— Wrn Lt, Drvr, Whelen, M6, Red LED, Color Lens, Ea -- Wrn Lt, Offer, Whelen, M6, Red LED, Color Lens, Ea -- Flange, Chrome, Wrn Lt, Whln, M6, Ea -- Wrn Lts, Whelen, Low Rr Side (2) M6 LED -- Wrn Lt, Drvr, Whelen, M6, Red LED, Color Lens, Ea -- Wrn Lt, Offer, Whelen, M6, Red LED, Color Lens, Ea -- Housing, Step, Wrn Lts (1 pair) M-U-I-Zlqu 1 I -- riange, l;nrome, vvrn Lt, Wnln, mu, to 58 -81 -2000 1 F- Wrn Lts, Whelen, Low Rr (2) M6 LED 57 -20 -1200 1 -- Wrn Lt, Drvr, Whelen, M6, Red LED, Color Lens, Ea 57 -20 -1201 1 j -- Wrn Lt, Offcr, Whelen, M6, Red LED, Color Lens, Ea 58 -01 -2140 2 -- Flange, Chrome, Wrn Lt, Whln, M6, Ea 59 -01 -0000 1 Miscellaneous Wrn Lts 59 -01 -1300 S < 2 I -- Mars Lt, Clear LED, Model 888 Two (2 ) Mars Model 888 pedestal mounted LED warning light, with driver side clear and officer side red, shall be provided on the apparatus, one on each side of front bumper gravelshield. The lights shall be controlled by a rocker switch located in the emergency light switch electrical console. 1 _= CHASSIS SPECS - 2013.008 04/04/14 =_ 1 = EXT SA Pmpr/Tnkr Chassis Modifictns - 2013.008 04/04/14 =_ 10 -01 -1100 1 Vehicle Dimensions, Sngl Axle 10 -02 -1100 1 Label, Data, Fluid Levels 10 -02 -1200 1 Label, Data, Height x Length, Weight 10 -02 -1300 1 Label, Data, "No Ride" Rr Step 10 -02 -2100 1 Label, Indicating Number of Seats 10 -02 -2500 1 Label, "Caution: Do Not Wear Helmet While Seated" 10 -03 -1210 1 Chassis Preparation, Comm 10 -03 -6020 1 Tow Plates (2), Rr Frame Rail, Under Step, 3/4 "x3" ID 80 -43 -2400 1 -- Painting, Tow Plates, Blk 10 -04 -2150 1 j -- Bumper Ext, 18 ", By Bdy Bldr 10 -04 -2340 1 1 -- Bumper Gravelshield, 18 ", By Bdy Bldr 10 -04 -3560 S 1 1 -- Bumper SST W/ SS Wings 10 -04 -2710 1 J -- Bumper Cmpt, Center, Reel Compt 10 -06 -1110 1 Whl Trim, S/S Hub /Lug Cvrs, Front/Rr, Sngl Axle 10 -06 -1602 1 Tire Pressure Indicator, Sngl Axle, Commander 10 -07 -1200 1 Exhaust, Extension Under RH, Bdy 10 -07 -1500 1 -- Exhaust Heat Shield, Under Bdy Compts 10 -08 -1300 1 Mud Flaps, Front Whls, Blk, w/ Bdy 10 -08 -2100 1 Mud Flaps, Rr Whls, Blk, w/ Bdy 10 -10 -0800 S < 1 Cab Step Overlay, 4 Dr LH Side w /Compt Final design of overlays to be approved by both customer and Rosenbauer engineering to maximize stepping space as much as possible. 10 -10 -0900 S 1 Cab Step Overlay, 4 Dr RH Side w /Compt 20 -24 -4200 20 -24 -4110 22 -30 -4100 21 -01 -2500 22 -40 -7900 22 -41 -7200 20 -26 -2200 20 -26 -2400 20-26-2600 20 -26 -3200 20 -26 -4400 27 -10 -3400 21 -00 -2000 21 -00 -3300 21 -01 -0200 21 -01 -5500 21 -01 -6500 21 -01 -7100 21 -01 -8100 22 -51 -5400 24 -62 -1300 26 -17 -1052 23- 02.1300 24 -62 -1200 26 -17 -1052 20 -30 -3500 I _= EXT Rear Mount Pumper Pump&Plumbing - 2013.008 04/04/14 =_ -- Pump, Waterous, S100D /C20, 1 Stage, Rr Mt I-- Pump Flow Rtng, Waterous, S100D /C20, 1500 GPM, RM -- Intk, Mstr, Gtd, 6 ", Mnl, B trfly, Rear, Bhnd Pnl I-- Drain /Bleeder, IC Lift -Up, Mnl 1/4 Turn {-- .Adptr, LW Alum, 30 Deg, 6 "F x 5" Storz I-- Cap, 5" Storz, LW Alum, Lckng, w /Chain or Cable { -- Pump Seal, Mech, Waterous -- Pump Impeller, Waterous, Flame Plated Hubs { -- Pump Anode, Waterous, Removable -- Pump Shift, Waterous, Elec /Pneumatic Operated {-- Pump Primer, Waterous, VPO, Oil Less, Elec, Push Button -- Pressure Gvrnr, FRC, In- Cntrl, w /Bdy TGA300 STAINLESS STEEL PUMP PLUMBING �— Screens /Anodes, Pump I-- Piping, Stnls Stl - 1250 GPM & Up {- Pump Drain, Master, Manifold, Push Pull Type -- Intk Manifold, Stnis Stl {— Dschg Manifold, Stnis Stl -- Painting, Pump & Piping, Silver { -- Threads, National Hose (NST) I-- Tank -To -Pump, Water Tank, 3 ", Rr Mt I-- Vlv Mfger, AKR, 8000,(3") I-- Sealed Lever Banks - Cable Cntrls (EACH) { -- Tank Fill /Cooling Line, Water Tank, 2" I-- Vlv Mfger, AKR, 8000, (2 ") I-- Sealed Lever Banks - Cable Cntrls (EACH) I-- Pump Instln, Rr Mt Split -Shaft, By Bdy Bldr 20 -31 -1000 1 Fire Pump Testing - Pumpers/Tankers 20 -31 -1100 1 I-- Pump Test, Pumper, UL 20 -31 -1500 1 I-- Pump Test, Label 20 -31 -3200 1 Dump - Relief Vlv, Suction Side, ELK #40, NST 20 -31 -4100 1 Pump Cooler, Bypass -To -Tank, 3/8" 20 -31 -5100 1 Heat Exchanger, Engine, Hook -Up Only 22 -30 -1200 1 Intk, Gtd, 3 ", Rr Left Side, Rr Mt 21 -01 -2502 1 I-- Drain /Bleeder, IC Lift -Up, Mnl 1/4 Turn - Spec Only 22 -41 -1200 S < 1 I-- Adaptor, 3" NST M x 2 112" NST F with 2 1/2" Chrome plug and Chain One adaptor, 3" NST M x 2 1/2" NST F shall be furnished with 2 1/2" Chrome plated plug and Chain for cable securement. 24 -62 -1300 1 I -- Vlv Mfger, AKR, 8000, (3 ") 22 -55 -4012 1 {-- Intk Vlv Cntrl, Pull Rod, 1/4 Turn, AKR - IC 23 -20 -2100 2 Dschg, 2 -1/2 ", Rr Center Pump Panel, Left Side 21 -01 -2500 2 { -- Drain /Bleeder, IC Lift -Up, Mnl 1/4 Turn 24 -02 -1200 < 1 { -- Elbow, 2 -1 /2 "F x 2 -1/2" NST M, Chrome Delete one of the two elbows. The one directly below the hosebed is not needed. 24 -03 -1400 < 1 {— Cap, 2 -1/2 ", NST Chrome, Rocker Lug, w /Chain Delete one of the two caps. The one directly below the hosebed with no elbow is not needed. It will be a pre- connect. 24 -61 -1250 2 { -- Vlv Mfger, AKR, 8000, (2 -1/2 ") 26 -17 -1050 2 -- Sealed Lever Banks - Cable Cntrls (EACH) 27 -02 -1500 2 {-- Gauge, Dschg, Noshok, 2 -1/2" 400 #, WF 23 -20 -2200 1 Dschg, 2 -1/2 ", Rr Center Pump Panel, Left Center 21 -01 -2500 1 { -- Drain /Bleeder, IC Lift -Up, MnI 1/4 Turn 24 -02 -1200 1 -- Elbow, 2 -1 /2 "F x 2 -1/2" NST M, Chrome 24 -03 -1400 1 F- Cap, 2 -1/2 ", NST Chrome, Rocker Lug, w /Chain 24 -61 -1250 1 -- Vlv Mfger, AKR, 8000, (2 -1/2 ") 26 -17 -1050 1 { -- Sealed Lever Banks - Cable Cntrls (EACH) 27 -02 -1500 1 {-- Gauge, Dschg, Noshok, 2 -1/2" 400 #, WF 23 -20 -3250 1 Dschg, 3 ", Rr Center Pump Panel, Right Center 21 -01 -2500 1 -- Drain /Bleeder, IC Lift -Up, Mnl 1/4 Turn 24 -02 -2500 1 Elbow, LW Alum, 5" Storz x 3"F 24 -03 -2200 1 -- Cap, LW Alum, 5" Storz, w /Cable 24-61 -1300 1 {-- Vlv Mfger, AKR, 8000, (3") 26 -17 -1050 1 -- Sealed Lever Banks - Cable Cntrls (EACH) 27 -02 -1500 1 {-- Gauge, Dschg, Noshok, 2 -1/2" 400 #, WF 23 -20 -2300 S < 2 Dschg, 2 -1/2 ", Rr Center Pump Panel, Right Side Space them far enough apart below the hosebed to allow a wye to be screwed on to one of them without interfering with the other. 21 -01 -2500 2 -- Drain /Bleeder, IC Lift -Up, Mnl 114 Turn 24 -01 -2400 2 j -- Adptr, Reducing, 2 -1/2" NST F x 1 -1/2" NST M, Chrome 24 -61 -1250 2 -- Vlv Mfger, AKR, 8000, (2 -1/2 ") 26 -17 -1050 2 { -- Sealed Lever Banks - Cable Cntrls (EACH) 27 -02 -1500 2 {-- Gauge, Dschg, Noshok, 2-1/2"400#, WF 24 -11 -5200 1 Monitor Dschg, 3 ", Top of Bdy, Rr Mt Pump 21 -01 -2500 1 -- Drain /Bleeder, IC Lift -Up, Mnl 1/4 Turn 24 -61 -1300 1 -- Vlv Mfger, AKR, 8000, (3 ") 26 -17 -1050 1 -- Sealed Lever Banks - Cable Cntrls (EACH) 27 -02 -1500 1 { -- Gauge, Dschg, Noshok, 2 -1/2" 400#, WF 24 -30 -5800 1 { -- Hose Reel, HAN, Frnt Bmpr, Alum j 24 -31 -1100 1 -- Hose Reel, Alum Cvr Over Reel 24 -31 -2100 1 -- Hose Reel, Rwnd Cntrl, Weatherproof Push Button 24 -32 -1600 1 -- Dschg, Hose Reel, 2" 21 -01 -2200 1 { -- Drain /Bleeder, Class 1, Automatic 24 -32 -1700 1 Dschg, Hose Reel, Plmbd to Normal Pressure 24 -61 -1200 1 -- Vlv Mfger, AKR, 8000, (2 ") 26 -17 -1050 1 -- Sealed Lever Banks - Cable Cntrls (EACH) 27 -02 -1500 1 l-- Gauge, Dschg, Noshok, 2 -1/2" 400 #, WF 24 -33 -1600 S < 1 -- Hose, Water, Reel -Tex, 1 1/2" x (2) 50' Two (2) 50' lengths of Neidner Reel -Tex 1 1/2" water hose shall be provided and mounted on the specified hose reel. 27 -37 -3150 25 -06 -4200 25 -20 -1200 25-21 -1300 25 -22 -9300 25-23 -1000 27 -36 -1100 25-19 -9000 26-40 -1500 26 -40 -2200 26 -40 -3710 26 -40 -4300 26 -40 -5210 26 -40 -5500 26 -50 -1200 26 -50 -3300 j 26 -55 -1100 26 -55 -2410 1 I -- Koner, hose Keei, t-ront 1 j-- Air Blow Out, Hose Reel, Chassis Air < 1 I-- Foam Sys, F /PRO 2002, Cis A/B, 5G/400P,12V Foam plumbed to: -Front reel -Three (3) rear upper pre - conects 1 -- Foam Plmbg, Sngl Class A Tank, 1" Mnl Vlv 1 I— Foam Tank, Intgrl Poly, 20 Gal, Class A 1 I-- Foam Tank, UPF 1 1— Tank Drain, 1 " Gate Viv, Under Tank 1 I-- Foam Tank Gauge, FRC, Class A, Pump Panel 1 j- Foam System, NFPA #1901, Install Standards 1 == EXT Rear Mount Pumper Pump Cmpt - 2013.008 04/04/14 =_ 1 Pump Encisr, Specs, Rr Mt, EXT 1 I-- Pump Panel Lctn, Rr Mt, LH Side Bhnd Rr Whls 1 -- Pump Cntrl Panel, Rr Mt, Sealed Lever Bank 1 -- Pump Cntri Panel Eno Door, Rr Mt, Left Side, Roil Up 1 Pump Cntrl Panel, Rr Mt, Blk Thermo Ctng 1 Pump Access Dr, Rr Mt, Uppr Rr, Alum for Chvrn S < 1 Pump Access Panels, Rr Mt, Side Cmpts Bhnd Rr Whls The lower panel on the rear center of the truck shall be removable with thumb style compression latches. 1 I Heater, Pump Eno, 30,OOOBTU, w /Swtch 1 Heat Pan, Pump Eric, Rr Mnt, Removable 1 I Labels, Test Data and Safety Placards 1 Labels, IC Color Coded, EXT 26 -56 -1430 1 Pump Panel Lt, Rr Mt, Low Profile, LED 27 -01 -1500 1 1— Mstr Gauges, Noshok, 4" PSI, Pr 27 -01 -4100 1 Gauge, Test Taps 27 -35 -1100 1 Water Tank Gauge, FRC, TankVision, Pump Panel 27 -37 -1100 11 Air Horn, Push Button, Pump Panel 1 I == EXT HLFD / HRFD SA Rear Mount Pmpr - 2013.008 04104/14 =_ 25 -28 -1160 S < 1 Water Tank, 800 Gal, Pmpr/Tnkr, , Poly, Rect 800 gallon water tank 25 -42 -1100 1 ( -- Water Tank, Base Specs, Poly 25-42 -1200 1 l-- Water Tank, Manufacturer, UPF, Poly 01 -18 -0450 1 1-- Warranty, Water Tank, UPF, BR 25-44 -1700 1 -- Water Tank, Fill Tower, 10" x 10 ", EXT 25 -50 -0500 1 -- Tank Drains, EXT 25 -50 -1400 1 l-- Water Tank Clean -out & Plug, 3" 29 -00 -2120 1 Hosebed, Pmpr, >168" L, HD, 44" Wide - EXT Z`d_1u -ZUSU i noseoea, uraung, tXtra Alum, >ioui Long - CAI 29 -10 -5020 1 Hosebed Storage Cpcty, EXT 29 -10 -5090 1 -- Hosebed, Strge Cpcty, 30 Cubic Feet, Minimum 29 -10 -5400 8 I -- Hosebed, Strge Cpcty 1.75" DJ Hose (50 -ft Lngth) 29 -10 -5600 12 -- Hosebed, Strge Cpcty 2.5" DJ Hose (50 -ft Lngth) 29 -10 -6000 6 -- Hosebed, Strge Cpcty 5" LDH SJ Rubber (100 -ft) 29 -10 -8150 3 Hosebed, Divider, 1/4" Alum, EXT 29 -10- 8550 1 Hosebed, Partition, Front of Hosebed, > 48" - EXT 29 -10 -8699 S < 1 BlitzFire Pocket, Cartridges and Deck Gun Pipe Hose Deflector A Blitz Fire ramp and storage pocket shall be provided for the left most hose bed storage area for protected storage of pre- connected department supplied Blitzfire. Two (2) individual removable aluminum hose cartridges shall be provided for the two (2) 1 3/4" pre- connect hosebeds. Two (2) spare cartrdiges will also be provided for a total of four (4). A hose deflector shall be provided for the right most hosebed to allow hose to payout around the deck gun piping. 29 -20 -6450 1 Hosebed Cvr, Alum T /P, >168" L, 37 -48" Wide - EXT 29 -20 -6650 1 I-- Mnl Operation, Hosebed Cvr, Alum T/P 29 -20 -7310 4 -- Hsbd Cvr Lts, Recess In Door, Auto Swtch, 4" Rnd Grote LED, Ea 29 -20 -7800 < 9 -- Rr Vinyl Flaps for Alum Cvr Black 30 -01 -2020 1 Bdy Const - Rosenbauer EXT - SA RrMt Pumper 30 -01 -2250 1 -- Electrolysis Corrosion Cntrl 30 -01 -3430 1 -- Side Body Height, EXT -SA RrMt Pmpr, 94" (Commander 11" RR) 30 -02 -1920 1 -- Side Body Header, Alum, Pntd, Sngl Axle, EXT 44 -05 -1200 1 -- Whl Well Panel, Alum, Pntd, Sngl Axle 44 -06 -4320 1 I- Fenderette, Polished Stainless Steel, EXT 30 -10 -1520 1 I -- Sub - Frame, EXT, RrMt Pmpr 31 -01 -6070 1 100" OAW, 26" Full Dpth Bth Sides, HL/HR 31 -01 -6424 1 Roll Up Drs, Outside Cmpt, HL /HR, 220" RrMt Bdy 30 -02 -1600 1 -- Drs, Roll -Up, Outside Cmpt, Specs, EXT 30 -02 -1260 8 I-- Dr Strap, EZ -Pull Down, Ea 31 -01 -6400 1 -- Bdy, Rosenbauer EXT, RrMt Pmpr, 220" 32 -05 -4179 32 -05 -6982 32 -05 -5260 45 -00 -4225 44-40 -1020 45 -02 -4100 45-30 -1125 45 -05 -4100 45-30 -1125 55 -01 -3390 55 -06 -1100 32 -05 -6260 45 -00 -4425 44 -40 -1020 45 -02 -4100 45 -30 -1125 45 -15 -1200 45 -16 -1100 45 -30 -1800 55 -01 -3390 55 -06 -1100 90 -21 -1200 I- Cmpt Height, 79" High Left, High Side, RU Drs, RrMt Pmpr -- Ahd Rr Whis, 44'/44 ", Two (2) Full Ht Cmpts, RUO Cmpt I-- Frnt of Bdy -44" Full Ht Compt -Roll Up Outside Compt -- Fmt of Bdy, Left, Cmpt Provisions, EXT I-- Vents, Compts, Louvers (Ea) I-- Shelf, Adjust, Alum 3/16 ", EXT I-- Turtle Tile, Shelves/frays, 1/4 Depth, (each) I-- Slide Tray, 250 #, Alum 3/16" (1/4 Dpth), EXT I-- Turtle Tile, Shelves/Trays, 1/4 Depth, (each) I-- Cmpt Lt, Wall, OSS Access, 54" LED Tube Lt, (2) Ea Cmpt I-- Cmpt Lt, Dr Swtch, Auto, Ea I-- Ahd Rr Whls -44" Full Ht Compt -Roll Up Outside Compt -- Ahd Rr Whls, Left, Cmpt Provisions, EXT I-- Vents, Compts, Louvers (Ea) I-- Shelf, Adjust, Alum 3/16 ", EXT I-- Turtle Tile, Shelves/Trays, 114 Depth, (each) I-- Divider, Vert, Bolt -In, 3/16" Alum I-- Tool Board, Roll Out, 500 #, 3/16" Alum (1/4 Depth) adjustable -- Turtle Tile, Floor, Cmpt, Ahd Rr Whls (1/4 depth) I -- Cmpt Lt, Wall, OSS Access, 54" LED Tube Lt, (2) Ea Cmpt I-- Cmpt Lt, Dr Swtch, Auto, Ea I -- SCBA Mntg Brkt, Zico, 45 Minute, Non Riding 3Z- Ub - /UJb 1 1-- AnV Kr Wnls -bZ- Sngi UnIpt, No HyO KacK -KU Uutsiae Gmpt 45 -00 -4505 1 j -- Upr Hgh Sde Cmpt(s), Left, Cmpt Provisions, EXT 44 -40 -1020 1 Vents, Compts, Louvers (Ea) 45 -10 -2410 1 (_ SlideMaster Tip -Down Tray, 250# (1/2 Depth), Up to 51"W 45 -30 -1125 1 l— Turtle Tile, Shelves/Trays, 1/4 Depth, (each) 45 -30 -1900 1 -- Turtle Tile, Floor, Cmpt, Uppr Hgh Sde (up to 114 depth) 55 -01 -3370 1 l -- Cmpt Lt, Wall, OSS Access, 28" LED Tube Lt, (2) Ea Cmpt 55 -06 -1100 1 l-- Cmpt Lt, Or Swtch, Auto, Ea 32 -05 -8160 S 1 Bhd Rr Whls -54" Full Ht Compt -Roll Up Outside Compt 45 -00 -4625 1 I -- Shnd Rr Whls, Left, Cmpt Provisions, EXT 44 -40 -1020 1 -- Vents, Compts, Louvers (Ea) 45 -15 -1200 1 Divider, Vert, Bolt -In, 3/16" Alum 45 -16 -1100 < 2 -- Tool Board, Roll Out, 500 #, 3/16" Alum (1/4 Depth) adjustable 45-20 -1100 55 -01 -3390 55 -06 -1100 32 -06 -4179 32 -06 -6982 32 -06 -5260 45 -00 -5235 44-40 -1020 45 -02 -4100 45 -30 -1125 45 -06 -2100 46 -30 -1125 45 -25 -1100 55 -01 -3390 55 -06 -1100 32- 06.6260 45 -00 -5415 44 -40 -1020 45 -02 -4100 45 -30 -1125 45 -26 -1100 55 -01 -3390 55 -06 -1100 32 -06 -7030 45 -00 -5505 44 -40 -1020 45 -30 -1900 55 -01 -3370 55 -06 -1100 32 -06 -8160 45 -00 -5615 44 -40 -1020 45 -02 -4100 45 -30 -1125 45 -05 -4100 45 -30 -1125 45 -10 -2410 45 -30 -1125 55 -01 -3390 55 -06 -1100 S < 2 1— SCBA Bttl Rck, Frmd Alum, Ea Two (2) 8" x 8" square tubes, one on top of another on the rear most portion of the compartment on the floor with rubber scuff protection inside. -- Cmpt Lt, Wall, OSS Access, 54" LED Tube Lt, (2) Ea. Cmpt I-- Cmpt Lt, Or Swtch, Auto, Ea I— Cmpt Height, 79" High Right, High Side, RU Drs, RrMt Pmpr I— Ahd Rr Whls, 44'/44 ", Two (2) Full Ht Cmpts, RUO Cmpt j— Frnt of Bdy -44" Full Ht Compt -Roll Up Outside Compt -- Fmt of Bdy, Right, Cmpt Provisions, EXT I— Vents, Compts, Louvers (Ea) I-- Shelf, Adjust, Alum 3/16 ", EXT I-- Turtle Tile, Shelves/Trays, 1/4 Depth, (each) I-- Slide Tray, 500 #, Alum 3/16" (1/4 Dpth), EXT I- Turtle Tile, Shelves/Trays, 1/4 Depth, (each) I— Backboard Mtg, (1)Vert, With Runners I— Cmpt Lt, Wall, OSS Value Line, 54" LED Tube Lt, (2) Ea Cmpt I— Cmpt Lt, Or Swtch, Auto, Ea -- Ahd Rr Whls -44" Full Ht Compt -Roll Up Outside Compt -- Ahd Rr Whls, Right, Cmpt Provisions, EXT I-- Vents, Compts, Louvers (Ea) I-- Shelf, Adjust, Alum 3/16 ", EXT I— Turtle Tile, Shelves/Trays, 1/4 Depth, (each) -- Fire Extngshr Module, Brushed Alum, Ea -- Cmpt Lt, Wall, OSS Value Line, 54" LED Tube Lt, (2) Ea Cmpt I-- Cmpt Lt, Or Swtch, Auto, Ea j— Abv Rr Whls -32 Sngl Compt w/ Hyd Rack -RU Outside Cmpt I— Upr Hgh Sde Cmpt(s), Right, Cmpt Provisions, EXT -- Vents, Compts, Louvers (Ea) -- Turtle Tile, Floor, Cmpt, Uppr Hgh Sde (up to 1/4 depth) �— Cmpt Lt, Wall, OSS Value Line, 27" LED Tube Lt, (2) Ea Cmpt I— Cmpt Lt, Or Swtch, Auto, Ea -- Bhd Rr Whls -54" Full Ht Compt -Roll Up Outside Compt I— Bhnd Rr Whls, Right, Cmpt Provisions, EXT I-- Vents, Compts, Louvers (Ea) I-- Shelf, Adjust, Alum 3/16 ", EXT I— Turtle Tile, Shelves/Trays, 114 Depth, (each) -- Slide Tray, 250 #, Alum 3/16" (1/4 Dpth), EXT I-- Turtle Tile, Shelves/Trays, 1/4 Depth, (each) -- SlideMaster Tip -Down Tray, 250# (1/2 Depth), Up to 51 "W I-- Turtle Tile, Shelves/Trays, 1/4 Depth, (each) �— Cmpt Lt, Wall, OSS Value Line, 54" LED Tube Lt, (2) Ea Cmpt I— Cmpt Lt, Dr Swtch, Auto, Ea 33 -60 -2120 11 Rr Bdy, Flat Back, RrMt Pumper, EXT 33 -61 -1620 1 -- Rr Step, EXT Bdy, Bolt -On, 18" 38 -90 -2000 11 l-- Access Ladder, Rosenbauer EZ Climb, Right Rr 44 -11 -5150 1 Whl Well Cmpt, Ahd of Whls Left Side, EXT 44 -10 -1600 1 {-- Whl Well Cmpt, Sngl SCBA, Poly Tube, S/S Dr, (Fire Shopp) 44 -11 -5350 1 Whl Well Cmpt, Bhnd Whls Left Side, EXT 44 -10 -1600 1 {-- Whl Well Cmpt, Sngl SCBA, Poly Tube, S/S Dr, (Fire Shopp) 44 -11 -5550 1 Whl Well Cmpt, Ahd of Whls Right Side, EXT 44 -10 -1600 1 J-- Whl Well Cmpt, Sngl SCBA, Poly Tube, S/S Dr, (Fire Shopp) 44 -11 -5750 1 Whl Well Cmpt, Bhnd Whls Right Side, EXT 44 -10 -1600 1 { -- Whl Well Cmpt, Sngl SCBA, Poly Tube, S/S Dr, (Fire Shopp) 90 -02 -1550 1 Ladder Mtg, Hyd Rack, Center Mt Lo Pro, Right Side, EXT 90 -02- 0520 1 J -- Controls, Mtg, Ladder Rack., Rear Body Face 90 -02 -1250 1 { -- Ladder Rack, Ladder Covering, Pntd to Match Body 90 -02 -1265 1 Ladder Rack, Covering, Pntd to Match Body 90 -03 -0220 1 { -- Ladders, Ground, Provd'd By Manufacturer, MN 90 -03 -3300 1 J-- Ladder, Roof, Duo - Safety, l4' Alum 775 -A 90 -06 -4600 1 { -- Ladder, Ext, Duo - Safety, 24' Alum, 2 Sect 900 -A 90 -02 -5350 S < 1 Fldg Attic Ladder Mntg, On Hyd Rack -MN Next to the attic ladder mount, on the inboard side of the ladder rack when stored, shall be a pair of tulip clips for holding a fire department supplied trash hook pole. 90 -03 -0230 1 I -- Ladders, Fldg Attic, Provd'd By Manufacturer, MN 90 -08 -2600 1 J-- Ladder, Attic, Duo - Safety, 10' Alum, Fold 585 -A 90 -16 -5430 3 Pike Pole Mtg, On Hyd Ladder Rack, Ea, EXT Three full ladder rack length tubes 90 -16 -6300 1 Pike Pole Provd'd By, Purchaser /Fire Department 90 -16 -2399 1 J— Non -Bdy Bldr Supl'd Pike Pole, 6' Fbrgls, Round Hndl 90 -16 -2899 1 { -- Non -Bdy Bldr Supl'd Pike Pole, 10' Fbrgls, Round Hndl 1 == EXT Pmpr/Tnkr Common Body Parts - 2013.008 04/04/14 =_ 44 -01 -1400 1 {-- Bdy Trim, Frnt Bdy, Ht of Side Cmpts, Alum TIP 144 -01 -4020 1 1 {-- Bdy Trim, Rr Bdy, Smooth Alum for Chevron Stripe, EXT 33 -62 -1200 1 J -- Steps, Fldg, Rr Left Hand (2) S < 1 HANDRAILS - EXT PUMPER/TANKER LIGHTED In addition to provided lighted hand rails on the body, the four chassis supplied entrance grab handles shall be removed and replaced with body matching lighted grab rails. All apparatus hand rails shall be LED lighted and will come on automatically when the apparatus park brake is set. 33 -70 -1400 S 1 { -- Handrails, Rr Step, Vert, 60 ", Pair 33 -70 -2100 S 1 { -- Handrails, Pmpr, Below Hosebed, Horz, 48" 33 -70 -3100 S 1 { -- Handrails, Pmpr, Top of Bdy Sides, Rr, 12 ", Pair 44 -02 -1120 1 { -- Rub Rails, Lwr Bdy, EXT, Extrd Alum 1 UNDERBODY COMPARTMENTS 11 == EXT Pmpr/Tnkr - AC Electrical System - 2013.008 04/04/14 == 60 -15 -1100 1 { -- Gnrtr, Onan Hyd, 6KW, 120/240V, 1 PH, CMHG 60 -20 -3600 1 { -- Gnrtr Install, Fxd , Hyd Driven, Base Specs 60 -20 -4100 1 { -- Circuit Breaker Box, 6 to 8KW, 1 PH 60 -20 -7100 60 -15 -9300 60 -15 -9810 60 -20 -1400 60 -20 -8300 60 -25 -1000 60 -25 -1400 S 60 -30 -2300 60 -30 -2370 60 -30 -2400 60 -30 -2470 60 -25 -9100 < 60 -25 -9610 S < 61 -01 -1520 61 -01 -3100 61 -02 -1700 61 -03 -3400 61 -04 -7200 61 -04 -9100 61 -05 -1220 61 -05 -4000 61 -04 -8200 61 -01 -3110 61 -02 -1800 61 -03 -3400 61 -04 -7200 61 -04 -9100 61 -05 -1220 61 -05 -4000 61 -04 -8200 i �-- vi u u of canci ��u , owc vu i iNt 1 I -- Gnrtr Instrmnt Panel Lctn, Side Cmpt 1 -- Gnrtr, Hyd, Engage By PTO Swtch in Cab 1 I- -Gnrtr Remote Excite Swtch , Pump Panel 1 -- Gnrtr Mtg, Front of Hosebed 1 I -- Gnrtr Wiring, Combo, SO & THHN 1 =_= 120V Receptacles = == 4 I -- Rcptcl, 120V, 20 Amp, Strght Bid, Duplex 1 -- Rcptcl Lctn, Left Side, Ahd Rr Whls Cmpt, Ea 1 { -- Rcptcl Lctn, Left Side, Bhnd Rr Whls Cmpt, Ea 1 -- Rcptcl Lctn, Right Side, Ahd Rr Whls Cmpt, Ea 1 I -- Rcptcl Lctn, Right Side, Bhnd Rr Whls Cmpt, Ea 1 Transfer Swtch , Gen to Shore Power Wired to all interior cab receptacles and interior body mounted receptacles. 2 Shore Power Strip, 120V, 15 Amp, 4 -Plug Strip Rcptcl, MN Total Quantity Two (2) 15 amp power distribution strips with four (4) receptacles shall be provided. The strips shall be powered by the chassis shore line power and generator power. Exact locations to be determined. Two (2) Cable Reels, Provd'd by Bdy Bldr -- Cable Reel, Hannay ECR1600, Elec Rwnd, 120V 50A 3 Wire BLK I -- Cable Reel Lctn, Left Side, Ahd Rr Whls Cmpt, Upper -- Cable, Elec, 120V, 200'10/3 Blk I -- Cable Rcptcl, 120V 1-5 -20R, 3- Prong, Twst Lck I-- Ball Stop, Cable, Orange -- Jct Box, AKR, (4)120V L5 -20R TL, 1-5 -20P Pgtl, Ylw I -- Jet Box, Holder, Brushed Alum I-- Roller Assy, Cable Reel, 4 -Way, SS Rollers -- Cable Reel, Hannay ECR1600, Elec Rwnd, 120V 50A 3 Wire YLW Cable Reel Lctn, Right Side, Ahd Rr Whls Cmpt, Upper -- Cable, Elec, 120V, 200' 10/3 Blk I -- Cable Rcptcl, 120V 1-5 -20R, 3 -Prong, Twst Lck -- Ball Stop, Cable, Orange I-- Jct Box, AKR, (4)120V 1-5-20R TL, 1-5 -20P Pgtl, Yiw I -- Jct Box, Holder, Brushed Alum I-- Roller Assy, Cable Reel, 4 -Way, SS Rollers 1 f == EXT Pmpr/Tnkr - Equipment Systems - 2013.008 04/04/14 == I I == EXT SA Pmpr/Tnkr - PnVLtr /Str - 2013.008 04/04/14 == 80 -05 -5200 1 Bdy Paint, Pmpr/Tnkr, Sngl Color, EXT 80 -30 -1250 1 Compt Finish, Spatter Coat, Zolatone, Up to 8 Cmpts, EXT 80 -39 -1999 1 = == NO Shelf/Tray /Divider/Toolboard Finish - Pick to Select 80 -40 -1250 1 Whl Finish, By Chassis Manufacturer 80 -42 -1500 1 Bdy Paint, Touch Up, 2 oz. Bttl, One Color 80 -50 -1800 1 Lettering, 4" Mylar Gold Leaf, 75 Letters 80 -50 -3600 1 Lettering, 8 -12" Scotchlite Reflect, 30 Letters 80 -65 -1200 S < 1 Flag Graphics, Cstm Detailed, POR Two (2) custom flag graphics designed primarily with artistic features shall be proposed for installation on the upper, body headers of the apparatus. 80 -70 -1700 S < 1 Stripe, Sngl Reflective, Straight Design 2" Gold 6" White A straight Scotchlite reflective stripe, 2" gold over 6" white with a 1" gap between shall be applied horizontally around the cab and, body in compliance with applicable NFPA 1901 standards.. 80 -75 -1600 S < 1 -- Reflective Stripe Material, Gold and White The color of the 3M brand striping material shall be 2" Gold and 6" White. 80 -72 -1100 1 Stripe, Reflective, Chevron Pattern Entire Rr 80 -72 -2010 1 Chevron, Reflective, Cab Door Interiors, Red /Amber 1 == EXT Pmpr/Tnkr - Loose Equipment - 2013.008 04/04/14 =_ S < 1 EQUIPMENT - MOUNTING Purchased or fabricated bracketry will be provided as necessary to mount the following equipment on the apparatus before delivery of the completed vehicle. 2 MSA Thermal Imager CAB SuperVac VR2 Fan(electric) Supervac P164S(electric) 5 Bank flashlite charger Genisis Extrication Tools 2 Fuel can holder 3 Gear flashlights(Streamlight) 2 Pick axes Flat head axe Sledge Hammer Haligan tool Bolt cutter Dry Chem Ext Pressure water ext Foam Ext CO2 Ext Cribbing 42xl7x24 inches 5 SCBA's spare scba mask buddy breather hose 200 ft rope 2 Canvas Tarp 12X18 14 ft roof ladder 24 ft extension ladder 1 0 ft folding attic ladder D handle Pike pole 4ft 6ft Prybar Piercing Nozzle 2 5 gallon floor dry buckets Radio charger(3bank ?) CAB Truck Mounted radio CAB scoop shovel Flat shovel 5 spare scba bottles hose jacket hose clamp Stihl Chainsaw 4 500watt portable lites Long Back Board 4 Hazard Cones Milwaukee Sawzall QRAE 11 46a w /Charger CAB ToxiRaePro HCNw /charger CAB 2 112 Hydrant Gate Valve 2.5 - - >1.5 gated Y 2 15 fog nozzles 2.5 fog nozzle 2 2.5 straight bore straight bore tips for deckgun 1.5 foam eductor 2 hydrant wrench 4 spanner large 4 spanner small 2.5 --- > 3/4 adapter cone reducer 2 2.5 - - >1.5 reducer 2 2.5 --- >2.5 male 2 2.5 --- >2.5 female 5 storz - - - -> St Paul Hydrant 5 storz - - - -> MPLS Hydrant 2 loose coil 20amp cord 2 loose house cord 20aFem--> 1 5aMale Adapt 15aMale - - >20a Fern Adapt Electric Junction Box 100ft Highrise bundle Tool Bag Ball Peen Hammer Rubber Mallett 2 BlitzFire Nozzles Wall hydrant wrench Windshield saw 1 st Aid Kit Electrical detector in case Havis Tablet Mount Base /arm for Havis Mount CAB 2 Wheel Chocks 90 -01 -0300 1 Equipment Loading Allowance of 2000# 90 -01 -5900 1 Whl Chocks Pair Zico #SAC -44 Fldg w/ Mts 90 -17 -1099 S < 1 Loose Equipment Supplied By Body Builder LOOSE EQUIPMENT SUPPLIED BY BODY BUILDER Two (2) MSA Thermal Imager TICMSA10145951 w/10145771 Chargers One 1 SUP718VR2 electric fan 11/11/LU14 P 14 DESCRIPTION PART NO S QTY One (1) SUPP164S electric fan One (1) SUV 90400 5 bank flashlight charger Genesis Extrication tools mounted by Genesis (per attached list) Two (2) Feel can holders barley AW329 Three (3) SUV90500 Streamlight geear flashlights One (1) Leatherhead LEA FAY -6 One (1) AW373 Superstatic 1/2" Darley 200' rope Two (2) J861 Darley Canvas Tarp 12'x 18' One (1) Motorola WPLN4108 radio charger bank Four (4) Darley A2509 Optimum 500 watt portable light One (1) Milwaukee Sawzall with case (Elec. w /quick change blade) One (1) SOU A3784MB 5" Storz --- St Paul hydrant One (1) SOU A3784AB 5" Storz - -- MPLS Hydrant Two (2) TFTXXLG -32 TI=T Blitz Fire nozzles One (1) DS -GTC -202 Havis Tablet Mount One (1) Base arm for Havis Mount 90 -35 -1900 1 Emrgncy Road Kit - DOT Required INTERNATIONAL® Prepared For: Columbia Heights FD., MN. Rosenbauer Minnesota 5181 260th St. Fallbrook Wyoming, MN 55092- (651)462 - 1000 Reference ID: N/A Model Profile 2015 7400 SBA 4X2 (SA625) October 29, 2014 Presented By: CRAWFORD TRKS. & EQUIP. jim graham 3601 - 6TH AVE SOUTHEAST ABERDEEN SD 57401 - (605)225 -6200 APPLICATION: Fire /Pumper (Emergency) MISSION: Requested GVWR: 44000. Calc. GVWR: 44000 Calc. Start / Grade Ability: 25.08% / 3.45% @ 55 MPH Calc. Geared Speed: 67.6 MPH FUEL ECONOMY: 7.78 MPG @ 55 MPH DIMENSION: Wheelbase: 242.00, CA: 131.00, Axle to Frame: 75.00 ENGINE, DIESEL: {MaxxForce 10) EPA 10, 350 HP @ 2000 RPM, 1150 lb-ft Torque @ 1200 RPM, 2200 RPM Governed Speed, 350 Peak HP (Max) TRANSMISSION, AUTOMATIC: (Allison 3000EVS_P) 5th Generation Controls; Close Ratio, 5- Speed; With Overdrive, Includes Oil Level Sensor, With Provision for PTO, Less Retarder, Max. GVW N/A CLUTCH: Omit Item (Clutch & Control) AXLE, FRONT NON - DRIVING: (Meritor MFS- 14 -143A) Wide Track, I -Beam Type, 14,000 -lb Capacity AXLE, REAR, SINGLE: (Dana Spicer S30 -190) Single Reduction, 30,000 -115 Capacity, W Wheel Ends Gear Ratio: 5.38 CAB: Conventional 6 -Man Crew Cab TIRE, FRONT: (2) 12R22.5 G661 HSA (GOODYEAR) 484 rev /mile, load range H, 16 ply TIRE, REAR: (4) 315/80R22.5 G751 VISA (GOODYEAR) 484 rev /mile, load range L, 20 ply SUSPENSION, RR, SPRING, SINGLE:Vari -Rate; 31,000 -lb Capacity, With 4500 lb Auxiliary Rubber Spring PAINT; Cab schematic 10OGN Location 1: 2618, Fire Eng Red (Custom) Chassis schematic N/A Proposal: 5784 -01 INTERNATIONAL® Vehicle Specifications October 29, 2014 2015 7400 SBA 4X2 (SA625) Description FIR Wt Tot Wt (Ibs) (Ibs) Base Chassis, Model 7400 SBA 4X2 with 242.00 Wheelbase, 131.00 CA, and 75.00 Axle to Frame. 6962/3442 10404 TOW HOOK, FRONT (2) Frame Mounted 8/0 8 FRAME RAILS Heat Treated Alloy Steel (120,000 PSI Yield); 10.866" x 3.622" x 0.433" (276.Omm x 92.Omm 326/580 906 x 11.1 mm); 456.0" (11582mm) Maximum OAL BUMPER, FRONT Steel, Swept Back 0/0 0 Includes : BUMPER, FRONT Powder Coated Gray (Argent) Color FRAME EXTENSION, FRONT Integral; 20" In Front of Grille 129/ -24 105 WHEELBASE RANGE 189" (480cm) Through and Including 256" (650cm) O/0 0 AXLE, FRONT NON - DRIVING {Meritor MFS- 14 -143A) Wide Track, I -Beam Type, 14,000 -lb Capacity 58/0 58 Notes : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. SUSPENSION, FRONT, SPRING Parabolic, Taper Leaf; 14,000 -lb Capacity; With Shock Absorbers 37/0 37 Includes : SPRING PINS Rubber Bushings, Maintenance -Free Notes : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. BRAKE SYSTEM, AIR Dual System for Straight Truck Applications 0/0 0 Includes BRAKE LINES Color and Size Coded Nylon DRAIN VALVE Twist -Type DUST SHIELDS, FRONT BRAKE DUST SHIELDS, REAR BRAKE GAUGE, AIR PRESSURE (2) Air 1 and Air 2 Gauges; Located in Instrument Cluster PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel PARKING BRAKE VALVE For Truck QUICK RELEASE VALVE Bendix On Rear Axle for Spring Brake Release: 1 for 4x2, 2 for 6x4 SLACK ADJUSTERS, FRONT Automatic SLACK ADJUSTERS, REAR Automatic SPRING BRAKE MODULATOR VALVE R -7 for 4x2, SR -7 with relay valve for 6x4 Notes : Rear Axle is Limited to 23,000 -lb GAWR with Code 04091 BRAKE SYSTEM, AIR and Standard Rear Air Cam Brakes Regardless of Axle /Suspension Ordered. DRAIN VALVE (Bendix DV -2) Automatic; With Heater; for Air Tank 0/0 0 Includes : DRAIN VALVE Mounted in Wet Tank BRAKE SHOES, REAR Cast 0/50 50 Notes Provides Rear Axle GAWR Up to 26,000 -Lb. The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires. AIR BRAKE ABS {Bendix AntiLock Brake System) Full Vehicle Wheel Control System (4- Channel) 0/0 0 2 Proposal: 5784 -01 INTERNATIONAL Vehicle Specifications 2015 7400 SBA 4X2 (SA625) Description AIR DRYER {Bendix AD-1P} With Heater Includes : AIR DRYER LOCATION Inside Left Rail, Back of Cab BRAKE CHAMBERS, FRONT AXLE {Haidex} 20 Sqln BRAKE CHAMBERS, REAR AXLE {Haidex GC3636} 36/36 Spring Brake Includes : BRAKE CHAMBERS, SPRING (2) Rear Parking; WITH TRUCK BRAKES: All 4x2, 4x4; WITH TRACTOR BRAKES: All 4x2, 4x4; 6x4 & 6x6 with Rear Tandem Axles Less Than 46,000 -lb. or GVWR Less Than 54,000 - lb. BRAKES, FRONT, AIR CAM S -Cam; 16.5" x 5.0 "; Includes 20 Sq. In. Long Stroke Brake Chambers Notes : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. BRAKES, REAR, AIR CAM S -Cam; 16.5" x 7.0 "; Includes 36136 Sq.ln. Long Stroke Brake Chambers and Spring Actuated Parking Brakes Notes Provides Rear Axle GAWR Up to 31,000 -Lb. The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires. AIR COMPRESSOR (Bendix Tu -Flo 550) 13.2 CFM Capacity STEERING COLUMN Tilting and Telescoping STEERING WHEEL 2- Spoke, 18" Diam., Black STEERING GEAR {Sheppard M -100} Power EXHAUST SYSTEM Single Horizontal, Aftertreatment Device, Frame Mounted Right Side, for Use With Long Tail Pipes Includes : NOTE: The Horizontal Tailpipe Includes a Temperature Control Device ENGINE COMPRESSION BRAKE for MaxxForce 16 Engines; Electronically Activated TAIL PIPE Horizontal, Exits Right Side Outside of Body, At Rear Wheels ELECTRICAL SYSTEM 12 -Volt, Standard Equipment Includes BATTERY BOX Steel with Plastic Lid DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab FUSES, ELECTRICAL SAE Blade -Type HAZARD SWITCH Push On /Push Off, Located on Top of Steering Column Cover HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever HEADLIGHTS (2) Sealed Beam, Round, with Chrome Plated Bezels JUMP START STUD Located on Positive Terminal of Outermost Battery PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light RUNNING LIGHT (2) Daytime, Included With Headlights STARTER SWITCH Electric, Key Operated STOP, TURN, TAIL & B/U LIGHTS Dual, Rear, Combination with Reflector TURN SIGNAL SWITCH Self - Cancelling for Trucks, Manual Cancelling for Tractors, with Lane Change Featu re October 29, 2014 F/R Wt Tot Wt (Ibs) (Ibs) 23/2 25 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0/0 0/0 0/0 -15/13 0 0 0 0 -2 0/0 0 0/0 0 0/0 0 3 Proposal: 5784 -01 INTERNATIONAL® Vehicle Specifications October 29, 2014 2015 7400 SBA 4X2 (SA625) Description F/R Wt Tot Wt : TURN SIGNALS, FRONT Includes Reflectors and Auxiliary Side Turn Signals, Solid State Flashers; Flush (Ibs) (Ibs) Mounted : WINDSHIELD WIPER SWITCH 2 -Speed with Wash and Intermittent Feature (5 Pre -Set Delays), Integral with Turn Signal Lever WINDSHIELD WIPERS Single Motor, Electric, Cowl Mounted WIRING, CHASSIS Color Coded and Continuously Numbered CIGAR LIGHTER Includes Ash Cup 1/0 1 HORN, ELECTRIC (2) Disc Style 1/0 1 IGNITION SWITCH Keyless 2/0 2 POWER SOURCE Cigar Type Receptacle without Plug and Cord 1/0 1 ALTERNATOR {Leece- Neville 14931PAH) Brush Type, 12 Volt 320 Amp. Capacity, Pad Mount 11/0 11 BODY BUILDER WIRING To Rear of Frame, With Stop, Tail, Turn, and Marker Lights Circuits, Ignition 2/0 2 Controlled Auxiliary Feed and Ground, Less Trailer Socket BATTERY SYSTEM {International) Maintenance -Free, (3) 12 -Volt 195OCCA Total 46/9 55 RADIO AM /FM/WB /Clock/3MM Auxiliary Input, with Multiple Speakers 1/0 1 DATA RECORDER Includes Display Mounted in Overhead Console 2/0 2 HORN, AIR Black, Single Trumpet, Air Solenoid Operated 0/0 0 BATTERY DISCONNECT SWITCH {Joseph Pollak 51 -315) Positive Type, Lever Operated, Cab Mounted 1/0 1 HEADLIGHTS Long Life Halogen; for Two Light System 0/0 0 CLEARANCE /MARKER LIGHTS (5) (Truck Lite) Amber LED Lights, Flush Mounted on Cab or Sunshade 0/0 0 STARTING MOTOR {Delco Remy 38MT Type 300) 12 Volt; less Thermal Over -Crank Protection 0/0 0 INDICATOR, LOW COOLANT LEVEL With Audible Alarm 0/0 0 INDICATOR, BATTERY WARNING Green BATTERY ON Indicator, Mounted on Left Side of Instrument Panel, 1/0 1 To be Used with Factory Installed or Customer Mounted Battery Disconnect Switch CIRCUIT BREAKERS Manual -Reset (Main Panel) SAE Type III With Trip Indicators, Replaces All Fuses 0/0 0 Except For 5 -Amp Fuses GRILLE Stationary, Chrome 0/0 0 FRONT END Tilting, Fiberglass, With Three Piece Construction; for 2007 & 2010 Emissions 0/0 0 GRILLE EMBER SCREEN Mounted to Grille and Cowl Tray to Keep Hot Embers out of Engine and HVAC Air 0/0 0 Intake System PAINT SCHEMATIC, PT -1 Single Color, Design 100 0/0 0 Includes : PAINT SCHEMATIC ID LETTERS "GN" PAINT TYPE Base Coat/Clear Coat, 1 -2 Tone 010 0 PAINT CLASS Single Custom Color 0/0 0 KEYS - ALL ALIKE, ID Z -001 0/0 0 CLUTCH Omit Item (Clutch & Control) -67/ -8 -75 OIL FILTER, ENGINE (Hudgins Model 960 Spinner) 26/ -1 25 4 Proposal: 5784 -01 INTERNATIONAL Vehicle Specifications October 29, 2014 2015 7400 SBA 4X2 (SA625) Description ENGINE, DIESEL {MaxxForce 10} EPA 10, 350 HP @ 2000 RPM, 1150 lb-ft Torque @ 1200 RPM, 2200 RPM Governed Speed, 350 Peak HP (Max) FAN DRIVE {Horton Drivemaster Polar Extreme} Direct Drive Type, Two Speed, With Residual Torque Device for Disengaged Fan Speed Includes : FAN Nylon RADIATOR Aluminum, Front to Back Cross Flow, Series System; 1663 Sqln Core and 885 Sqln Charge Air Cooler and 470 Sqln Low Temperature Radiator Down Flow Includes DEAERATION SYSTEM with Surge Tank HOSE CLAMPS, RADIATOR HOSES Gates Shrink Band Type; Thermoplastic Coolant Hose Clamps RADIATOR HOSES Premium, Rubber FEDERAL EMISSIONS EPA, OBD and GHG Certified for Calendar Year 2014; MaxxForce 9 & MaxxForce 10 Engines AIR CLEANER Dual Element Includes : GAUGE, AIR CLEANER RESTRICTION Air Cleaner Mounted THROTTLE, HAND CONTROL Engine Speed Control for PTO; Electronic, Stationary Pre -Set, Two Speed Settings; Mounted on Steering Wheel ENGINE CONTROL, REMOTE MOUNTED Provision for; Includes Wiring for Body Builder Installation of PTO Controls; With Ignition Switch Control for MaxxForce and Navistar post 2007 Emissions Electronic Engines EMISSION COMPLIANCE Engine Shutdown System Exempt Vehicles, Complies With California Clean Air Regulations TRANSMISSION, AUTOMATIC {Allison 3000EVS_P} 5th Generation Controls; Close Ratio, 5- Speed; With Overdrive, Includes Oil Level Sensor, With Provision for PTO, Less Retarder, Max. GVW N/A OIL COOLER, AUTO TRANSMISSION (Modine) Water to Oil, for Allison or CEEMAT Transmission TRANSMISSION SHIFT CONTROL {Allison} Push -Button Type; for Allison 3000 & 4000 Series Transmission TRANSMISSION OIL Synthetic; 29 thru 42 Pints ALLISON SPARE INPUT /OUTPUT for Emergency Vehicle Series (EVS); Fire /Pumper, Tank, Aerial /Ladder SHIFT CONTROL PARAMETERS Allison 3000 or 4000 Series Transmissions, 5th Generation Controls, Performance Programming AXLE, REAR, SINGLE {Dana Spicer S30 -190} Single Reduction, 30,000 -ib Capacity, W Wheel Ends. Gear Ratio: 5.38 Includes : REAR AXLE DRAIN PLUG (1) Magnetic, For Single Rear Axle Notes : The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires. : When Specifying Axle Ratio, Check Performance Guidelines and TCAPE for Startability and Performance SUSPENSION, RR, SPRING, SINGLE Vari -Rate; 31,000 -lb Capacity, With 4500 lb Auxiliary Rubber Spring Notes : The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires. F/R Wt Tot Wt (Ibs) (Ibs) 0/0 0 461 -3 43 6/ -1 0/0 0 4/0 4 0/0 0 0/0 0 0/0 0 211/38 249 25/0 25 0/0 0 0/0 0 010 0 0/0 0 0/388 388 0/115 115 Proposal: 5784 -01 INTERNATIONAL® Vehicle Specifications October 29, 2014 2015 7400 SBA 4X2 (SA625) Description FIR Wt Tot Wt (Ibs) (Ibs) FUEL TANK Top Draw; D Style, Non Polished Aluminum, 16" Tank Depth, 50 U.S. Gal., 189 L Capacity, with 0/0 0 Quick Connect Outlet, Mounted Right Side, Under Cab CAB Conventional 6 -Man Crew Cab 285/69 354 Includes ARM REST (2) Molded Plastic; One Each Door COAT HOOK, CAB Located on Rear Wall, Centered Above Rear Window CUP HOLDERS Two Cup Holders, Located in Lower Center of Instrument Panel DOME LIGHT, CAB Rectangular, Door Activated and Push On -Off at Light Lens, Timed Theater Dimming, Integral to Console, Center Mounted GLASS, ALL WINDOWS Tinted GRAB HANDLE, CAB INTERIOR (1) "A" Pillar Mounted, Passenger Side GRAB HANDLE, CAB INTERIOR (2) Front of "B" Pillar Mounted, One Each Side GRAB HANDLE, CAB INTERIOR (4) Two Each Side, Rear Door Mounted at Hinge Side and "C" Pillar Mounted INTERIOR SHEET METAL Upper Door (Above Window Ledge) Painted Exterior Color STEP (8) Two Steps Per Door Notes :419" CA Loss GRAB HANDLE, CAB INTERIOR (4) Safety Yellow, Crew Cab 0/0 C GAUGE CLUSTER English With English Electronic Speedometer 0/0 C Includes : GAUGE CLUSTER (6) Engine Oil Pressure (Electronic), Water Temperature (Electronic), Fuel (Electronic), Tachometer (Electronic), Voltmeter, Washer Fluid Level ODOMETER DISPLAY, Miles, Trip Miles, Engine Hours, Trip Hours, Fault Code Readout WARNING SYSTEM Low Fuel, Low Oil Pressure, High Engine Coolant Temp, and Low Battery Voltage (Visual and Audible) SEATBELT WARNING PREWIRE Includes Seat Belt Switches and Seat Sensors for all Belted Positions in 0/0 0 the Cab and a Harness Routed to the Center of the Dash for the Aftermarket Installation of the Data Recorder and Seatbelt Indicator Systems, for 4 to 6 Seat Belts GAUGE, OIL TEMP, ALLISON TRAN 110 1 GAUGE, AIR CLEANER RESTRICTION {Filter- Minder) With Black Bezel Mounted in Instrument Panel 2/0 2 IP CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge Cluster 0/0 0 SEAT, PASSENGER (H.O. Bostrom Tanker 450) for SCBA with SecureAll Locking System, Non - Suspension, 010 0 High Back, Vinyl, Adjusters, 7- Degree Back Angle, With Covered Back, International Logo on Headrest SEAT, DRIVER (H.O. Bostrom Sierra Air 100) NFPA Compliant, Air Suspension, High Back, Vinyl with Covered 22/6 28 Back and International on Headrest for Fire Truck Includes : SEAT BELT 3- Point, Lap and Shoulder Belt Type SEAT, REAR {H.O. Bostrom Tanker 400CT) for SCBA with SecureAll Locking System, Three Individual Seats 0/0 0 on One Riser, Non Suspension, High Back, Vinyl, With Covered Back and International on Head Rest GRAB HANDLE (2) Chrome Towel Bar Type With Anti -Slip Rubber Inserts; for Cab Entry, Mounted Left and 6/0 6 Right, Each Side at "B" Pillar GRAB HANDLE, ADDITIONAL EXT (2) Chrome; Towel Bar Type With Anti -Slip Rubber Inserts; Mounted Left 5/0 5 and Right Side on Exterior, Rear of Rear Doors, With Crew Cab 6 Proposal: 5784 -01 INTERNATIONAL® Vehicle Specifications October 29, 2014 2015 7400 SBA 4X2 (SA625) Description F/R Wt Tot Wt (Ibs) (Ibs) MIRRORS (2) {Lang Mekra) Styled; Rectangular, 7.09" x 15.75" & Integral Convex Both Sides, 102" Inside 8/0 8 Spacing, Breakaway Type, Thermostatically Controlled Heated Heads, Power Both Sides, Clearance Lights LED, Bright Finish Heads & Brackets SEAT BELT All Red; 4 to 6 0/0 0 CAB MOUNTING HEIGHT EFFECTS High Cab in Lieu of Mid High Cab Mounting (Approx. 4.5 ") 010 0 AIR CONDITIONER (Blend -Air) With Integral Heater & Defroster 42/5 47 Includes HEATER HOSES Premium HOSE CLAMPS, HEATER HOSE Mubea Constant Tension Clamps REFRIGERANT Hydrofluorocarbon HFC -134A INSTRUMENT PANEL Center Section, Flat Panel 0/0 0 HVAC FRESH AIR FILTER 0/0 0 STORAGE POCKET, DOOR Molded Plastic, Full Width; Mounted on Passenger Door 010 0 CAB INTERIOR TRIM Deluxe; for Crew Cab 0/0 0 Includes "A" PILLAR COVER Molded Plastic CAB INTERIOR TRIM PANELS Cloth Covered Molded Plastic, Full Height; All Exposed Interior Sheet Metal is Covered Except for the Following: with a Two -Man Passenger Seat or with a Full Bench Seat the Back Panel is Completely Void of Covering CONSOLE, OVERHEAD Molded Plastic; With Dual Storage Pockets with Retainer Nets and CB Radio Pocket DOOR TRIM PANELS Molded Plastic; Driver and Passenger Doors FLOOR COVERING Rubber, Black HEADLINER Soft Padded Cloth INSTRUMENT PANEL TRIM Molded Plastic with Black Center Section STORAGE POCKET, DOOR (1) Molded Plastic, Full- Length; Driver Door SUN VISOR (2) Padded Vinyl with Driver Side Toll Ticket Strap, Integral to Console CAB REAR SUSPENSION Air Bag Type 0/0 0 SUNSHADE, EXTERIOR Aerodynamic, Painted Roof Color; Includes Integral Clearance /Marker Lights 15/2 17 WHEELS, FRONT DISC; 22.5" Polished Aluminum, 10 -Stud (285.75MM BC) Hub Piloted, Flanged Nut, Metric -5/0 -5 Mount, 8.25 DC Rims; With Steel Hubs Notes Aluminum Wheels not Painted or Coated Compatible Tire Sizes: 11 R22.5, 12R22.5, 255/70R22.5, 255/80R22.5, 265/75R22.5, 275/70822.5, 275/80R22.5, 295/75R22.5, 295/80R22,5 WHEELS, REAR DUAL DISC; 22.5" Polished Aluminum, 10 -Stud (285.75MM BC) Hub Piloted, Flanged Nut, 0/ -83 -83 Metric Mount, 9.00 DC Rims; With Steel Hubs Notes Aluminum Wheels not Painted or Coated Compatible Tire Sizes: 12R22.5, 295/75R22.5, 295/80R22.5, 315/80R22.5 Polished Surface Outside Dual Only (2) TIRE, FRONT 12R22.5 G661 HSA (GOODYEAR) 484 rev /mile, load range H, 16 ply 38/0 38 (4) TIRE, REAR 315/80R22.5 G751 MSA (GOODYEAR) 484 rev /mile, load range L, 20 ply 0/124 124 Services Section: 7 Proposal: 5784 -01 INTERNATIONAL® Vehicle Specifications October 29, 2014 2015 7400 SBA 4X2 (SA625) Description F/R Wt Tot Wt (Ibs) (Ibs) WARRANTY Standard for WorkStar 7300/7400 (4x2, 44, 6x4, 6x6), Effective with Vehicles Built January 2, 0/0 0 2014 or Later, CTS -2002T Total Component Weight: 8267/4723 12990 Spare Tire and wheel 0/0 0 Fire wrap brake lines below rails 0/0 0 Arm rest; all seats 0/0 0 Total Goods Purchased: 0/0 0 The weight calculations included in this proposal are an estimate of future vehicle weight. The actual weight as manufactured may be different from the estimated weight. Navistar, Inc. shall not be liable for any consequences resulting from any differences between the estimated weight of a vehicle and the actual weight. 8 Proposal: 5784 -01 INTERNATIONAL® Financial Summary October 29, 2014 2015 7400 SBA 4X2 (SA625) (US DOLLAR) Description Net Sales Price: Approved by Seller: Official Title and Date Authorized Signature This proposal is not binding upon the sellerwithout Seller's Authorized Signature Price $96,100.00 Accepted by Purchaser: Firm or Business Name Authorized Signature and Date Official Title and Date The TOPS FET calculation is an estimate for reference purposes only. The seller or retailer is responsible for calculating and reporting /paying appropriate FET to the IRS. Proposal: 5784 -01 ME x W x w rr a O U 0 0 0 O 0 N o 0 OO��� 0,6 0 OOOO 0 0 0 0 tTr-,LnN 0 0O�Nn 00000^0 NNaNN H? '-q N to O y 3 10 u v v �aroi3 w�� a) roL•�:� o -vvEE v o m COOCC� w� o o LUiI U to tl) U U d C a1 0 0 d Q c Ero_� �' •- ,, �'3 41 >U� co c 1u v U v w� w0 �' - > E O C w v c cm Ot C a _� _ L. - ' T U v 'd ro Ct v c `a ro 0 rq fu .a � v in m Ln o °v Ln m LM U3, = -0 v M c °ULZ y v Q ay �a! v o U L. 41 sv T " 'D cl. v� � Lo+ .40 •� o c `0 Zs v to E c o= v(U o C d-+ L En 4�. m .— v IV ro �. ro O to ro 3 U O Y 'M =. •- O a, J ro ro L to v v 0 0 p c m � C `p uEvsv �N.LoE��s NNy .-J. f0 cl w ' ° .a L O ° V t ro u - i E N �t ° 3 CD o 0 o u ovn cro 1d) _=roE > t O C O N M v= - C O D O U O -0 E Oa 0 Cc 0 w : E ro4,m c O , y - CD w O 0 O s v o ov 41 'tn t6 CL E Y o C 41 o o� W c ro EC) E CD � 0 o` 'n �c000 c 3lan ,-°)°uoc 2 J h W en Uv = t .� c U .- ,' vo _ v a ro U � IZ , 0 vv Q Q rn o roL v v ro v 3 v> o ��Od 00 2:- 4V)'w< WvOJLLt" 0-0`.c w w 0 0 U w U A ggu °¢¢ ggig°�w �www° U U 0 u u u u a O 0 0 0 O O Ln 0 0 0 0 N O 0 0 0 0 00►l2 O 0 I 1-4 O 000-4 N V M Ln -4 N -4 O -4 N .4 Itt t0 0 (Y) It +-1 Ln Ln r-trl t0 IT 1-4 co .-L L71 Ln tD N Ln ri.iNN tD Ln Ln 1 NN 1 1 �'t 1 I 00 I 070 1 I N 1 Ln LnLnOO 11 Ln Ln Ln Ln Ln Ln Lfl INI d' :- It lD t0 ME x W x w rr a O U A >- �lk CO co O co cn� H c 01 C UUM I°— o Z ow .0 U Q 3 C � < U t L O t U +r Q °Z A c � a C U �o U c � O Q y O J O N M N N R Q w z Q U w x w x a Q U U '~ N C C Ql O` n n M N M Q 0 Go OC F- U r- -4 v m Lr n -uv A >- �lk CO co O co cn� H c 01 C UUM I°— o Z ow .0 U Q 3 C � < U t L O t U +r Q °Z A c � a C U �o U c � O Q y O J O N M N N R Q w z Q U w x w x a Q U ` CHANGE ORDER # I Columbia Heights, MN rusenbauer F/reffyhttng Technology DATE: See Below - Pre -con Changes JOB #: 13992 (wbh) SPEC NO. DESCRIPTION OF CHANGE COST 03.Feb.15 - Pre -Con Chgs Pre Con Form Changes Approved by Chief Gary Gorman E -Mail 2/3/2015. - Body See PCN for details. $1,435 3.Mar.15 - 51 -00 -1800 ADD: one 1 additional USB port for a total of two 2 $0 18.Mar.15 - 80 -50 -3600 DELETE: the 8 -12" lettering is not needed $286 We hereby agree to make change(s) specified above at this price $1,149 PREVIOUS CONTRACT AMOUNT $488,920 REVISED CONTRACT AMOUNT $490,069 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. wthorized Signature (contractor) Date accepted wthorized Signature (fire department) Date accepted rusendauer FlrerighUrrg 7'echn1710gy DATE: 18.Jun.15 JOB #: 13992 (wbh) CHANGE ORDER # 2 Columbia Heights, MN SPEC NO. DESCRIPTION OF CHANGE COST NOTE: Chg Ord #1 is included in Shop Order ADD: One (1) long handle tool storage compartment is to be installed in the body, officer side up high and between the roll -up door and hosebed riser, as per drawing. - -It is to have a smooth alum door to allow for application of chevron. —It is to have a D -Ring latch/handle. 90 -25 -7832 - -A stop is to be installed at' to prevent tools from sliding farther forward $0 We hereby agree to make change(s) specified above at this price $0 PREVIOUS CONTRACT AMOUNT $490,069 REVISED CONTRACT AMOUNT $490,069 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted Authorized Signature (fire department) Date accepted rusenhauer Firefighting Technatogy DATE: 28.Jul.15 JOB #: 13992 (wbh) CHANGE ORDER # 3 Columbia Heights, MN the air hom /elec horn selector switch on the dash is not needed. separate switch on the steerina wheel for the air horns. We hereby agree to make change(s) specified above at this price $0 PREVIOUS CONTRACT AMOUNT $490,069 REVISED CONTRACT AMOUNT $490,069 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted Authorized Signature (fire department) Date accepted rasenbauer Firefighting Technaiagg DATE: 17.Sep.15 JOB #: 13992 (wbh) Columbia Heights, MN Wrtt; NU. I DESCRIPTION OF CHANGE I COST CHANGE: The one (1) Whelen side -of -body (officer's side rearward) scene light is to be changed to a Whelen PFP1 R15 so it will fin the space that's We hereby agree to make change(s) specified above at this price ($339) PREVIOUS CONTRACT AMOUNT $490,069 REVISED CONTRACT AMOUNT $489,730 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted Authorized Signature (fire department) Date accepted CHANGE ORDER # 5 rosenbauer Columbia Heights, MN Firefighting Technology DATE: 30.Sep.15 JOE #: 13992 (wbh) SPEC NO. DESCRIPTION OF CHANGE COST CHANGE: the a -siren speaker is to be a F -S BP100, 100 watt speaker. 56 -02 156-02-1410 1400 We hereby agree to make change(s) specified above at this price $0 PREVIOUS CONTRACT AMOUNT $489,730 REVISED CONTRACT AMOUNT $489,730 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted I Authorized Signature (fire department) Date accepted F)ref)ghting Technninyy DATE: 9.Oct.15 JOB #: 13992 (wbh) •: Columbia Heights, MN �rtu NV. DESCRIPTION OF CHANGE COST NOTE: the two (2) customer supplied gas monitors are to be mounted on the 90 -00 -2000 lower shelf in L2. $0 NOTE: the customer supplied radio charger is to be mounted on the lower 190-00-2000 shelf in L2. Q" 72 -1000 is mber We hereby agree to make change(s) specified above at this price $0 PREVIOUS CONTRACT AMOUNT $489,730 REVISED CONTRACT AMOUNT $489,730 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted Authorized Signature (fire department) Date accepted CHANGE ORDER # 7 Columbia Heights, MN rosenbauer Flref /ghtlng Technology DATE: 26.Oct.15 JOB #: 13992 (wbh) SPEC NO. DESCRIPTION OF CHANGE COST 80 -50 -1800 DELETE: The 4" m lar gold leaf lettednq is to be eliminated. $408 80 -65 -1200 DELETE: The U.S.A. flag graphic is to be eliminated. $406 We hereby agree to make change(s) specified above at this price ($814) PREVIOUS CONTRACT AMOUNT $489,730 REVISED CONTRACT AMOUNT $488,916 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted Authorized Signature (fire department) Date accepted Firefighting YOchnoiag.0 DATE: 30.Oct.15 JOB #: 13992 (wbh) and 1.75" 600' of 5" hose is to Columbia Heights, MN E in two (2) lays rather than CHANGE; the 400' of 2.5" hose that's currently shown in the drawing on the far officer side is to be re- positioned to the driver side of the bed, against the One (1) hosebed divider is to be installed between the above 29 -10 -8150 mentioned 2.5" and 5" hose. $0 CHANGE: there are to be four (4) hosebed slide -out cartridges fabricated, two (2) for the 1.75" hosebed lays along with two (2) spares. The cartridges are to 29 -10 -8699 have a 6" inside width. $752 CHANGE: the two (2) hosebed dividers that are for the 1.75" hosebed lays are to be re- positioned so they will accommodate the above mentioned 6" U We hereby agree to make change(s) specified above at this price $752 PREVIOUS CONTRACT AMOUNT $488,916 REVISED CONTRACT AMOUNT $489,668 Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted Authorized Signature (fire department) Date accepted Fireflghit)ng Trth moagg CHANGE ORDER # 9 Columbia Heights, MN DATE: 12.Nov.15 - Final Insp Changes, Parts to Mod -Squad JOB #: 13992 (wbh) SPEC NO. DESCRIPTION OF CHANGE -COST 90 -17 -1099 CHANGE: Remove the flashlight charger and ship loose in L3. $0 60 -25 -9610 CHANGE; the 120v power strip that's mounted on the back of the center console is to be re- located so it's lower on the console, allowing room for the shelf that's to be added see next line). $44 50 -12 -2300 ADD: A shelf (4" x 16 ") is to be installed on the back of the center console (where the 120v power strip was installed. One (1) radio charge will be installed on the shelf. $165 60 -25 -9610 ADD: two (2) 120v 4 -place power strips are to be installed in L3, just below the out &down tray. Outlets facing outboard. Wired to shoreline and clenerator thru the transfer switch. $655 90 -00 -2000 CHANGE: the hose clamp and hose jacket are to be mounted on the upper shelf in L2. Adjust shelf as needed. $0 90 -00 -2000 CHANGE: Remove strap for black case in R2 and install a strap for CO2 extinguisher to stand in the R2 compartment, inboard corner $58 90 -00 -2000 CHANGE: R2 move chain box currently in front of ram to R1 to the rear left corner of bottom slide out $44 90 -00 -2000 CHANGE: Replace existing strap with longer to hold both cases on shelf in R1 $58 90 -00 -2000 CHANGE: Cut out the front of the tarp, box in R4 per marker layout $64 We hereby agree to make change(s) specified above at this price PREVIOUS CONTRACT AMOUNT REVISED CONTRACT AMOUNT Due to lead times of components and in fabrication this Change Order will delay delivery. ACCEPTED - The above price and specifications of the Change Order are satisfactory and are hereby accepted. All work to be performed under same terms and conditions as specified in original contract unless otherwise stipulated. Authorized Signature (contractor) Date accepted Authorized Signature (fire department) Date accepted $1,088 $489,668 $490,756